The PPR-Type agitator has a retractable paddle turbine attached to the shaft end and is driven by a socket system mounted directly to the gear shaft. The impeller profi le is specially engineered to open out automatically when the shaft begins to turn and fold back when the agitator is switched off . The impeller …
The F-Type agitator has a shaft-welded impeller and is driven by a socket system mounted directly to the gear shaft. The F-Type is designed for fl occulation. It operates at low speed to avoid breaking up the fl ocs while ensuring extremely high fl occulation performance. This fl occulator is available with 250 to 1,000 …
The P agitator has a shaft-welded turbine and is driven by a socket system mounted directly to the gear shaft. The type of agitator is determined by the required application: reagent preparations, homogenisation, polyelectrolyte preparation, etc P agitators have a 250 or 700 diameter turbine, and can also be secured by a mounting plate or …
The twin paddles on the drum agitator fold back to fit through the bung on standard containers. TMI recommends this type of appliance for small volumes and simple mixing applications. The type of agitator is determined by the required application. We supply with three-phase 50 Hertz tropicalized motors as standard. The standard impeller shaft is …
The AB agitator has a shaft-welded impeller driven by a socket system mounted directly to the motor shaft. TMI recommends this type of appliance for small volumes and simple mixing applications. Agitation is determined by the required application. AB agitators have a 120 or 160 diameter turbine, and can also be secured by a mounting …
The optional mounting frame off ers a signifi cant benefi t when installing and servicing an aerator. With a mounting frame, the aerator can be fi tted and removed in one piece and in one operation, without having to be disassembled. On a normal aerator, the relatively large moving mixing section requires the turbine to …
A noise control cover mounted around the motor unit significantly reduces the audible noise level. Its open-top design ensures that the motor unit remains properly vented, removing the need for a fan. The surface aerator sprays are hooded for two main reasons: As an abatement measure to reduce noise emissions from the downward water fl …
High-speed aerators diff er from low-speed versions in that they are mainly used for processes in which the oxygen transfer rate is not a crucial factor (under 1.1 kg of O2/kW/h). They consist of a high-rpm turbine inside a pipe. The pumpimpeller assembly is mounted on a polyester fl oat. The motor used is determined …
Floating aerators from TMI are primarily used on lagoons where civil engineering works would be very costly or unfeasible. These fl oating aerators share the same design characteristics as fi xed aerators, in which a gear motor with a high AGMA rating drives a surface turbine at low rpm. The only diff erence is in …
Our AVL 2 aerators consist of a drive unit and a low-rpm, surface-level turbine. The thin-blade, hub-welded turbines are designed to ensure a high oxygen transfer rate and to effectively keep the sludge in suspension. These low-speed aerators are available in 5.5 kW to 75 kW versions. The turbines are available in 1,220 to 2,800 …
