Application

In addition to agitators and aerators, TMI also designs and develops a complete range of equipment for preparing flocculants in powdered and liquid forms. Synthetic organic flocculants (polyacrylamides) are used in a number of industries.
• Water treatment
• Ore processing
• Paper manufacturing
• Chemical industry
• Etc.

Manual reagent preparations
(Manufloc 85001 - 85005)

Manufloc is a manual reagent preparation station that consists of a 100- to 500-litre PEHD tank with a ¾- to 2-inch tapping at the bottom, an agitator, and a fl occulant disperser made up of a water inlet and a variable-size hopper.

Manual reagent preparations
(Manufloc 85006 - 85080)

Manufloc 85006 – 85080 is a manual reagent preparation station that consists of a 600- to 8,000-litre PEHD tank with a ¾- to 2-inch tapping at the bottom, an agitator mounting frame, an agitator, and a flocculant disperser made up of a water inlet and a variable-size hopper.

AUTOFLOC C27E

The Autofloc C27 is TMI’s most compact polymer preparation station. With fewer options than other stations, it is easy to operate and available in 300- and 500-litre versions. Continuous flocculant production is vital even with low flocculant consumption. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode.

AUTOFLOC C27P

The Autofloc C27 is TMI’s most compact polymer preparation station. With fewer options than other stations, it is easy to operate and available in 300- and 500-litre versions. Continuous fl occulant production is vital even with low flocculant consumption. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode.

AUTOFLOC 27E

Emulsion, 1 tank

Continuous flocculant production is vital even with low fl occulant consumption. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofl oc 27 is available in 300- to 1,000-liters versions.

AUTOFLOC 27P

Powder, 1 tank

Continuous flocculant production is vital even with low fl occulant consumption. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofl oc 27 is available in 300- to 1,000-liters versions.

AUTOFLOC 87E

Emulsion, 1 tank big volume

The Autofloc 87 is a larger version of the Autofl oc 27 for preparing flocculants and any other reagent more intensively and at higher rates, in a single tank. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofl oc 87 is available in 600- to 6,000-litre versions.

AUTOFLOC 87P

Powder, 1 tank big volume

The Autofloc 87 is a larger version of the Autofl oc 27 for preparing flocculants and any other reagent more intensively and at higher rates, in a single tank. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofl oc 87 is available in 600- to 6,000-litre versions.

AUTOFLOC 89E

Emulsion, 2 tanks transfert by overflow

With the Autofloc 89, flocculants and any other reagent can be prepared more intensively and at higher rates in the two agitated preparation and maturation compartments, which are connected by an overflow inside the main tank. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofloc 89 isavailable in 1,000- to 12,000-litre versions.

AUTOFLOC 89P

Powder , 2 tanks transfert by overflow

With the Autofloc 89, flocculants and any other reagent can be prepared more intensively and at higher rates in the two agitated preparation and maturation compartments, which are connected by an overflow inside the main tank. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofloc 89 isavailable in 1,000- to 12,000-litre versions.

AUTOFLOC 88E

Emulsion , 2 tanks transfert by pump

With the Autofloc 88, flocculants and any other reagent can be prepared more intensively and at higher rates in the two agitated preparation and maturation compartments inside the main tank. Transfer is by pump. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofloc 88 is available in 1,000- to 12,000-litre versions.

AUTOFLOC 88P

Powder , 2 tanks transfert by pump

With the Autofloc 88, flocculants and any other reagent can be prepared more intensively and at higher rates in the two agitated preparation and maturation compartments inside the main tank. Transfer is by pump. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofloc 88 is available in 1,000- to 12,000-litre versions.

AUTOFLOC 85E

Emulsion, 3 tanks transfert by overflow

With the Autofloc 85, flocculants and any other reagent can be prepared more intensively and at higher rates in the three agitated compartments inside the main tank: the fi rst two compartments are used for maturation, with a residence time necessary for the fl occulant molecular chains to swell; the third compartment is fi tted with a control system to operate the station automatically. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofloc 85 is available in 500- to 12,000-litre versions.

AUTOFLOC 85P

Powder, 3 tanks transfert by overflow

With the Autofloc 85, flocculants and any other reagent can be prepared more intensively and at higher rates in the three agitated compartments inside the main tank: the fi rst two compartments are used for maturation, with a residence time necessary for the fl occulant molecular chains to swell; the third compartment is fi tted with a control system to operate the station automatically. Our AUTOFLOC stations are ready to be hooked up to the water and electricity supplies. They are fully automated and prepare the solution in continuous mode. Some processes are upgradable and the type of polymer used may change. This is why we have developed stations that can work easily with powder and emulsion polymers. The Autofloc 85 is available in 500- to 12,000-litre versions.

LIQUIFLOC 97W

This very compact unit is designed for the continuous preparation of emulsion flocculants. The system consists of:
– 1 water inlet with a pressure regulating valve, a solenoid valve, a control valve and a flow meter.
– 1 fl occulant inlet with a variable-rate metering pump.
– 1 watertight tank mechanically sealed to 3 bars, agitated by a high-speed agitator
– 1 electrical cabinet that houses the controls and automates system operation.

LIQUIFLOC 96

This very compact unit is designed to prepare emulsion flocculants in continuous mode. The system consists of:
– 1 water inlet with a pressure regulating valve, a solenoid valve, a control valve and a fl ow meter.
– 1 flocculant inlet with a variable-rate metering pump.
– 1 watertight tank mechanically sealed to 3 bars, agitated at high speed
– 1 electrical cabinet that houses the controls and automates system operation.

PREPAFLOC

The PREPAFLOC 8500 system is designed for the continuous production of powder or granules diluted in a liquid. The flowrate of the wetting liquid can be adjusted using a control valve and a fl ow controller.
• The liquid is dispersed in a special funnel to prevent dry spots.
• The powder for dosing is brought to the funnel by a screw conveyor and a variable-speed drive.
• The powder falls onto the stream of water and is wetted without forming lumps.
• The liquid/powder solution is drawn up into a disperser that has an open turbine to break up or eradicate any lumps that are undesirable in certain solution applications.
• The lifting capacity of the disperser can raise the solution to a height of 10 metres.
• The dry-product storage hopper is vibrated to prevent arching.

CONTIFLOC

This is a premium upgrade of the PREPAFLOC that operates on the same basic hydraulic principles. The differences lie in the command and control system that uses instrumentation and industrial data processing.
• Powder is metered by weight drop measured in the hopper.
• Water volume is measured by a meter or an electromagnetic flow meter.
• The resulting solution is mixed and transferred to the maturation tank(s) via a dispersing pump.
• PLC cycle control.

Click here

Discover our solutions